It is recommended to rinse and dry after each use. This will help keep chemicals from drying and thickening in the lines and pump. View the attached link for care instructions in the manual. https://brinly.com/wp-content/uploads/2022/06/pzq6nrodk7ixyfw47suy.pdf
You will need a Sleeve Hitch on your tractor for the BS-381BH to operate properly. Please check with your tractor manufacturer to be certain a Sleeve Hitch is compatible with your tractor.
The BS-38BH is the perfect piece of equipment to do leveling and grading. The teeth of the scarifier bar is not adjustable but is removable depending on how you are using the scraper. The attached video may help you better understand the capability of this scraper. https://www.youtube.com/watch?v=lpIzY2mA208
The Roger 180-Degree Full Dump Kit will allow you to load to full capacity. The cart will hold 650 lbs. with the kit attached, and this will allow for complete dumping of the load out of the cart.
Yes! For information regarding parts needs or warranty questions, please call our customer service team at 877-728-8224 or email us at customerservice@brinly.com. Additionally, view our parts store at https://shop.brinly.com/
The SAT-401BH is compatible with mowers, tractors, and ZTR’s that have a rear Hitch Plate. Please check that your equipment has a rear hitch plate. The SAT-401BH includes a Universal Hitch Pin that will secure the Spike Aerator to the Hitch Plate.
The SAT-401BH comes with a single, heavy-duty universal Hitch Pin that is easy to attach to any rider or tractor and most any ZTR or ATV.
The SAT-401BH ridged weight tray holds up to 150 lbs. of extra weight for maximum soil penetration and depth. Depending on the soil conditions, it can penetrate up to 2”. I have attached a short video on how to check the condition of your soil for the best results. https://www.youtube.com/watch?v=OkFSd7M6XLg
We do not call out a size because of the variation in the size of the cinder blocks. In the manual, we say, “Weight should be secured by rope, straps, or other suitable means to contain the weight in the tray.” The weight tray is 42” long.
Yes, there is an Agitator Wire that helps to keep the media from clogging and prevent bridging of the media while you use your spreader.