When not in use, you should lean it up against a wall indoors or outdoors. If outdoors, we recommend that you cover the unit from rain using a tarp. See your manual for instructions on preventing rust.

Yes, learn more about our‘The Roger 180-Degree Full Dump Cart Kit for Brinly-Hardy 10 cu. ft. Poly Carts‘.

Both the 10P and 17P tires are recommended to be pressurized at 14-19 PSI depending on the tire.

You can put up to 650 lbs. in the PCT-100BH and 850 lbs. in the PCT-17BH.

Both the 17 cu. ft. and 10 cu. ft. poly carts are proudly manufactured in Jeffersonville, Indiana, USA.

If you are having trouble assembling your unit or believe that some parts may be faulty please contact us. Our Brinly Customer Service representative will be ready and willing to assist you. We sometimes find that the lock bar is installed too far forward or too far back on the bed. This results in difficult locking or the bed coming unlatched. In addition, the spring on the underside of the foot pedal is crucial to the operation of the unit. Please ensure that it is correctly installed. If you have further questions please give us a call at 877-728-8224.

Yes! For information regarding parts needs or warranty questions, please call our customer service team at 877-728-8224 or email us at customerservice@brinly.com. Additionally, view our parts store at https://shop.brinly.com/

The Roger 180-Degree Full Dump Kit will allow you to load to full capacity. The cart will hold 650 lbs. with the kit attached, and this will allow for complete dumping of the load out of the cart.

Check out this helpful video on Brinly Cart bedsand how the compression molded beds are stronger than wear vacuum formed beds that can’t take the heat.