125 LB. Tow-Behind Deluxe Spreader with Extended Handle & Cover | BS261BH-A

This video applies to all Brinly Broadcast Spreaders. Models # P20-500BH, P20-500BHDF, PS10-70BH, BS26BH, BS261BH-A, BS36BH, BS361BH-A and HHS3-5BH. However, the HHS3-5BH Brinly handheld is only capable of spreading ice melt and not bagged or bulk rock salt.

Click here for the full video: Will it Spread in a Brinly Spreader? (youtube.com)

While it is not required, adding chains may give you an added sense of stability as you use the spreader on snow/ice. You may consider the use of chains on your Tractor/Mower as well. Safety is paramount as you apply your ice melt during the winter months!

A bumpy lawn can cause problems with spreaders. Uneven throwing and excess jostling can also disrupt the amount of material spread. There are a few ways to account for this issue. First, tire pressure can make rolling over bumps easier while still maintaining the necessary rolling capabilities. Second, lawn rollers are also an effective tool to level your lawn and remove trip hazards like mole hills.

You can spread sand with the Brinly spreaders. At present we do not offer a topdressing kit for our Brinly Spreaders.

Similarly to wheels slipping, wheels binding is often caused by the opposite issue. Broken Gears, lack of grease and -in some cases- gearbox covers can cause the transmission to bind. To check test to see if your transmission has broken gears that could be causing the wheels to stick, elevate the drive wheel and turn it by hand. If you hear any noises or rattling from your transmission this is a strong indication that your gears may be broken and need to be replaced.

If your fan will not stay in place and remain on the axle you may need to replace your fan driver. The fan driver is a special washer that supports your fan and locks it to the axle. This piece can be pruchased online at the shop.brinly.com

Toggle Content

Yes, there is an Agitator Wire that helps to keep the media from clogging and prevent bridging of the media while you use your spreader.

These wheels have performed well for our spreaders for many years; the composite nylon rims won’t corrode from fertilizer the way steel rims will.

While it is not required, adding chains may give you an added sense of stability as you use the spreader on snow/ice. You may consider the use of chains on your Tractor/Mower as well. Safety is paramount as you apply your ice melt during the winter months!

For Push spreaders, a normal walking speed should adequately dispense materials. Since push spreading is a hands-on activity, the rate at which the wheels turn directly determines the speed of the spinner fan. If the unit is not throwing far enough -or vice versa- increase or decrease your walking speed. For Tow spreaders, going a steady speed of LESS THAN 5 miles per hour is crucial. Speeds in excess of this can strip and damage the gears. To ensure the longevity of the unit, always go slow with the spreader, full or empty.

To best determine which dial setting is right for your particular material, we recommend looking at the helpful dial setting tool in your manual. This information can be found on page 28 and varies.

The max tire pressure is 30 PSI

The hopper is made out of heavy duty polypropylene*

All our spreaders can dispense ice melt; however, if you are looking for an even application of ice melt and salt, we recommend our specifically designed 70lb ice melt spreader for large jobs.

Depending on the Model of Brinly push spreader which you have, there are different capabilities. Primarily the Brinly 70lb Ice Melt Spreader versus the other push spreaders. The Brinly 50lb Push Spreader or Push Spreader with Deflector kit are capable spreaders that come with a grate and applicable spreader settings in the manual. This unit can spread almost anything (given moisture and granular do not clog the unit). This unit can also spread ice melt, however it may not do so well because of the gate size. For spreading Ice melt Salt, we recommend the Brinly 70lb Ice Melt Spreader. The difference between the Brinly 70lb Ice Melt Spreader and the other spreader in our line is the fact that this push spreader is made for spreading ice melt. As such, it is equipped with a different flow gate and agitator. The unit can also be used to spread seed, fertilizer, and lime if you wish.

Depending on the model spreader and how fast you walk while spreading, Brinly spreaders cover a wide range of spreading from 3 feet to 12 feet.

All of the Brinly push spreaders come with a collapsible/removeable handle that should allow for hanging or easier storage of the unit. To ward off dry rot, it is best to store the unit (for the tires) out of direct sunlight and with the unit clean. Areas with regulated or semi regulated temperatures will increase the longevity of your ties.

No, you engage the lock pin on one wheel only. Engaging both for regular use will strip the transmission. You are given the second lock pin to engage while spreading ice melt.

Click here for the assembly video.