My hamper is not level. How do I properly level my hamper basket?

Brinly recommends that the hamper be at least 5 inches off the ground. When operating, you want your tow arms to be level to the ground. Once you have leveled the tow bars using the hitch plate, you will need to level the hamper. To level the hamper, find the 4 bolts securing the hamper stop assembly. They should be located at the rear of brush housing assembly. First, loosen. Then move the cross tube UP to raise the hamper or move cross tube DOWN to lower the hamper.

What can the lawn sweeper sweep?

The Brinly lawn sweeper can effectively pick up a variety of debris from your lawn. However, optimal pickup depends on your how you set the unit and if the lawn has been dethatched recently. For example, this unit will not pick up pine needles well unless the needles themselves have been dethatched recently. Proper setting for the sweeper is 1-2 inches above the dirt and best results are sweeping after the lawn has been dethatched. Things like acorns, grass clippings, juniper berries, , pine cones, pine needles and leaves should all be able to be picked up by the Brinly Lawn Sweeper given the correct height adjustment and a proper dethatching before sweeping.

My brushes turn intermittently. I think that my gears are stripping. What should I do?

Since the wheels drive the gears and the gears turn the brushes, going the right speed is imperative. Speeds in excess of 5 miles per hour and heavy leaf loads can strip the gears on your sweeper.

How does this product handle the helicopter seeds from big-leaf maple trees?

The STS-427LXH, Brinly Lawn Sweeper works best on grass clippings, leaves and pine straw, but yes, it can pick up your helicopters! This sweeper is equipped with a built-in windscreen that will help keep them in place while your sweeping!

How much space does this sweeper take up when in the storage position?

The dimensions for this sweeper in the storage position is 56" tall x 53" wide x 25" deep. Check out this reference for the dimensions of our 42" Lawn Sweeper!

Can my sweeper be used to pick up plugs after aeration?

Yes! Your Brinly Lawn Sweeper should be perfect for this job; however, portions of the cores may break and fall below the grass line or disintegrate. A spotless lawn without un-swept cores depends upon the soil condition of those cores and the speed & setting of your Brinly sweeper.

ASSEMBLY VIDEO: LS2-42BH-G

Click here for the assembly video.

42″ Lawn Sweeper | LS2-42BH-G

High speed brushes pick up leaves, sticks, and more
Swinging hamper with pull cord makes unloading easy
Locking height adjustment secures brushes in proper position

SKU: LS2-42BH-G Category: LAWN SWEEPERS

Description

Allowing fallen leaves to lie on your lawn not only damages grass and impedes growth, but also contributes to thatch buildup and can cause bare spots in your lawn. Raking large areas is an inefficient and exhausting task; one that must be done repeatedly throughout the autumn season. If you’re fed up with raking and ready to enjoy beautiful fall weekends without the hard labor, consider a Brinly 42″ Tow-Behind Lawn Sweeper. Our high-performance sweeper is the ideal tool for sweeping up leaves, pine needles, grass clippings and old grass (thatch) after dethatching. The durable fabric hamper has the capacity to hold and haul 20 cu. ft. of lawn material and can be emptied right from the seat of your tractor using the included pull-rope with ergonomic t-handle. Six high-velocity brushes rotate to pick up material continuously, even during tractor turns. A high brush-to-wheel ratio and the easily adjustable brush-to-ground contact minimizes skipping and provides maximum performance. And when the project is complete, simply collapse the sweeper into its upright position for quick and easy storage.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Features

High-Velocity Brushes
The six high-velocity brushes with indexed brush height adjustment provides continuous material pickup even during tractor turns for a cleaner sweep.
Large Capacity Hamper
The large 20 cu. ft. hamper capacity and 42″ sweep provides maximum efficiency for fewer passes through the yard and less emptying.
Strong Polyweave Fabric
The polyweave fabric hamper in UV-resistant fabric provides long-lasting durability.
5-to-1 Brush-to-Ground Ratio
The high 5 to 1 brush to wheel ratio design offers increased brush to ground contact for a clean sweep of leaves, pine needles, grass clippings and other yard debris.
Minimize Storage Footprint
Featuring NEW collapsible hamper braces for easier assembly, and convenient upright storage when not in use.
Easy Height Adjustment
The Twist-Lock Height Adjustment secures the brush height setting in place, even when traveling over uneven terrain

Specs

Adjustments	Height Adjustments
Attachment	Universal Hitch Pin
Axle	Plated Steel
Axle Type	plated
Brush Diameter (in)	11
Color	Hammered Black
Country of Origin	Vietnam
Fits Brands	Fits all riding lawn and garden tractors, and ZTR mowers
Fits Models	All models with rear hitch plate
Frame	Powder Coated Steel
Gear Material	Plastic and sintered metal
Gear Ratio	5:1
Hamper Capacity	20
Hardware Material	Plated Steel
Hitch Type	Clevis
Max Tow Speed	5 mph
Number of Tines	0
Number of Tine Tips	0
Operating modes	Sweep
Speed	3 mph
Primary Material	Steel
Secondary Material	Polyweave Fabric
Product Height (in)	38
Product Length (in)	69
Product Width (in)	53

Where to Buy

Lawn Sweeper

My hamper is not level. How do I properly level my hamper basket?

Brinly recommends that the hamper be at least 5 inches off the ground. When operating, you want your tow arms to be level to the ground. Once you have leveled the tow bars using the hitch plate, you will need to level the hamper. To level the hamper, find the 4 bolts securing the hamper stop assembly. They should be located at the rear of brush housing assembly. First, loosen. Then move the cross tube UP to raise the hamper or move cross tube DOWN to lower the hamper.
What can the lawn sweeper sweep?

The Brinly lawn sweeper can effectively pick up a variety of debris from your lawn. However, optimal pickup depends on your how you set the unit and if the lawn has been dethatched recently. For example, this unit will not pick up pine needles well unless the needles themselves have been dethatched recently.

Proper setting for the sweeper is 1-2 inches above the dirt and best results are sweeping after the lawn has been dethatched. Things like acorns, grass clippings, juniper berries, , pine cones, pine needles and leaves should all be able to be picked up by the Brinly Lawn Sweeper given the correct height adjustment and a proper dethatching before sweeping.
My brushes turn intermittently. I think that my gears are stripping. What should I do?

Since the wheels drive the gears and the gears turn the brushes, going the right speed is imperative. Speeds in excess of 5 miles per hour and heavy leaf loads can strip the gears on your sweeper.
How does this product handle the helicopter seeds from big-leaf maple trees?

The STS-427LXH, Brinly Lawn Sweeper works best on grass clippings, leaves and pine straw, but yes, it can pick up your helicopters! This sweeper is equipped with a built-in windscreen that will help keep them in place while your sweeping!
FAQ VIDEO: LS2-42BH-G and LS2-42BH-S

Click here for the FAQ Video.
How much space does this sweeper take up when in the storage position?

The dimensions for this sweeper in the storage position is 56″ tall x 53″ wide x 25″ deep. Check out this reference for the dimensions of our 42″ Lawn Sweeper!
Can my sweeper be used to pick up plugs after aeration?
Yes! Your Brinly Lawn Sweeper should be perfect for this job; however, portions of the cores may break and fall below the grass line or disintegrate. A spotless lawn without un-swept cores depends upon the soil condition of those cores and the speed & setting of your Brinly sweeper.