Click here for the assembly video.
Click here for the FAQ Video.
The Tine Safety Wire is 26.5 inches.
The STS-427LXH, Brinly Lawn Sweeper works best on grass clippings, leaves and pine straw, but yes, it can pick up your helicopters! This sweeper is equipped with a built-in windscreen that will help keep them in place while your sweeping!
The Brinly lawn sweeper can effectively pick up a variety of debris from your lawn. However, optimal pickup depends on your how you set the unit and if the lawn has been dethatched recently. For example, this unit will not pick up pine needles well unless the needles themselves have been dethatched recently. Proper setting […]
The STS-42BHDK-A can be towed behind almost anything with a hitch plate. You do need to be mind full about your speed if you are pulling it with anything other than a lawn tractor. The working speed is 3-5 MPH.
Since the wheels drive the gears and the gears turn the brushes, going the right speed is imperative. Speeds in excess of 5 miles per hour and heavy leaf loads can strip the gears on your sweeper.
Should you wish to purchase the weight tray for your Aerator spreader please visit our parts store for part # 1019321 to place an order.
If the agitators on your Aerator Spreader are not turning -when weight/material is applied into the hopper- then there may be damage or a loss of cotter pins to the aerator tines. The first 2 spacers on the Aerator tines should be intact and held in place by a cotter pin. If the pin is […]
Brinly recommends that the hamper be at least 5 inches off the ground. When operating, you want your tow arms to be level to the ground. Once you have leveled the tow bars using the hitch plate, you will need to level the hamper. To level the hamper, find the 4 bolts securing the hamper […]